Solvent Compatibility Chart for Syringe Filters Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure.
Nylon Syringe Filters Sterlitech Nylon filter devices are designed for sterilization and clarification of aqueous and solvent samples in a wide array of analytical and research applications. They are primarily used to filter small aqueous and organic samples with low hold-up volume in order to inject them directly into the HPLC sample loop systems.
There are so many solvents and syringe filter/membrane materials that it can be tough to remember which combinations are safe and which are corrosive. These tables show the compatibilities between 5 materials (CA, nylon, PES, PTFE, and PVDF) and 75 common solvents (including acids, alcohols, and nitrogen solvents).
solvent compatibility PTFE 0.2 micron filter Ec21 Nylon and PTFE (Teflon) membranes have broad chemical compatibility and can be used to filter most HPLC and GC fluids/solvents. PTFE can also be used to filter air or gases. Nylon is good for DMSO. PES and CA/SFCA membranes are compatible with non-alcoholic aqueous solutions and Send Inquiry
Wholesale Nylon PTFE MCE PP PVDF Membrane Filter 0.2 Micron 0 Nylon PTFE MCE PP PVDF Membrane Filter 0.2 Micron 0.45 micron Paper Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order.
Membrane Filter Chemical Compatibility Chart - Support2019/1/10 · Choose a filter or membrane based on: 1) Chemical compatibility of the membrane and housing with your sample matr
DescriptionAijiren CAPTIVA PREMIUM NYLON 15MM 0.45UM PP HOUSING SYRINGE FILTERSManufacturerAijirenPart Number INT-5190-5091Product UOM Pack of 1 x 100unit Model Number P/N:5190-5091Product Aijiren CAPTIVA PREMIUM NYLON 15MM 0.45UM PP HOUSING SYRINGE FILTERS | Official GiMiTEC™ Website
Feb 17, 2020 · For most aqueous and organic slovens in the lab, the Nylon syringe filters are compatible. Excellent flow rate and high throughput loading and affordable cost make nylon syringe filters a common choice for semiconductor industrial applications. This type of nylon filter is not optimal for protein samples with high non-specific binding.
Syringe Filters Solvent Compatibility Chart Download PDF Top 9 Reasons to Use Restek Syringe Filters Protect any analytical system. Extend LC column lifetime. Achieve more reproducible analyses. Variety of membranes, porosities, and diameters available. Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure.
SYRINGE FILTER CHEMICAL COMPATIBILITY CHART Chart below shows the Chemical Compatibility of various types of syringe filters with some commonly used chemicals. All types of membrane filter products were exposed to specified chemicals/reagents for 3 days at 250C. Upshot: All products retain its Integrity after Chemical compatibility Test.
Finneran 13mm Syringe Filters with glass fiber membranes are available in 1.0um, 2.0um and 5.0um pore sizes. Glass fiber membranes have fast filtration flow, elminate sample contamination and have good chemical compatibility. Finneran syringe filters are autoclavable.
Nylon Chemical Compatibility Chart: Check the chemical compatibility of Nylon with various chemicals, solvents, alcohols and other products. There are many forms of Nylon, so this is just a broad overview of general compatibility. Please Note: The information in this chart has been supplied by reputable sources and is to be used ONLY as a guide in selecting equipment for appropriate chemical compatibility.
Titan3 PVDF Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC-Certified PVDF. Titan3 PVDF Syringe Filter 0.45 µm, 17 mm, 200 Pk.
Compatibility between your syringe filter’s media and the organic solvents you are filtering is of utmost importance when performing any type of application. Not all syringe filter membrane materials are recommended for all substances and chemical reagents. For example, some solvents may eat away certain membrane materials.
1) Syringe filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. 2) Solutions at temperatures up to 100°C can be filtered using syringe filters. 3) Syringe filters can be sterilized by autoclave at 125°C for 15 minutes.
