Sartorius Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45μm pore size. Pricing and Availability. Cytiva Whatman™ Anotop™ IC 25mm Syringe Filter.
Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm, A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Millex-SV 5.0 µm, A 25 mm diameter sterile syringe filter with a 5 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50.
Overview. Millex-HV Syringe Filter Unit, 0.45 µm, PVDF, 33 mm, gamma sterilized. This item is a direct replacement for SLHV033RB in countries where restricted. Sterile Millex filter units are available in a larger 33 mm housing with either MCE, PVDF or PES membranes. The larger filter surface area increases flow rate and throughput.
Setting the standard in small-volume filtration (1-200 mL), the unsurpassed consistency of Millex ® syringe filters in sample preparation has led to the development of many methods specifying their use. Featuring reduced sample loss due to minimal hold-up volumes, Millex ® syringe filters are ideal for use in a variety of applications including:
Oct 29, 2021 · The 50 mm Millex® filter units are especially useful for vacuum line protection. All units are bi-directional. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic
high flow rate 0.22um syringe filter Millex 0.22 μm Pore Syringe Filters for sale | eBay 100pcs Lab PTFE Membrane Syringe Filter 13mm 0.22um non-sterile HPLC 10pcs Lab Sterile Syringe Filter PES Filtration Membrane 33 mm 0.22 µm High Flow.
Oct 29, 2021 · 0.45 micro mushroom syringe filter Ec21-HPLC Vial Inserts Ec2 0.22 um ptfe syringe filter for wholesales Economical borosilicate gc headspace vials with flat Vial 0.5 Ml at 20ml headspace vials online Wide-opening 2 ml,2 x 32 mm vial Superior 33 expansion borosilie glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5,.0 and .5 ml 230W33 Convenience
Millex-GV Filter, 0.22 µm A 25 mm diameter sterile syringe Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas.
Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex ® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex® filters because of their unsurpassed quality and consistency. Millex ® filters not only feature minimal hold-up
Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters; Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives. Their unsurpassed quality and consistency of results has led to the development of many sample preparation methods that specify Millex® filters.
Millex Syringe Filters - SOMATCOFaster Flow Rate 33 mm Millex filters have 20% more filter surface than 25 mm filters for significantly higher flow rate and throughput.
Faster flow rate: The larger filter surface area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe. Higher operating pressure: Millex filters have a maximum housing pressure of 10.5 bar (150 psig), which means you can filter solutions faster than before.
Choosing the appropriate Millex filter size: Process Volume Millex Filter Diameter . 1 mL 4 mm 1 – 10 mL 13 mm 10 – 100 mL 25 mm 10 – 100 mL 33 mm 33 mm PVDF PVDF with GF prefilter PVDF Hydrophilic PTFE Water Blank 0.2 0.15 0.1 0.05 0 0 42 6810 Time, minutes Absorbance @ 214 nm, mAU 12 14 16 18 20 0.05 Water
A versatile PVDF membrane filter designed for critical filtration of aqueous and organic solvent-based solutions. The hydrophilic SteriLUX ® polyvinylidene fluoride (PVDF) membrane filter is available in discs, capsules, high capacity UltraCap ® and UltraCap ® H.D. capsules, and cartridges with 0.1 µm, 0.2 µm, 0.4 µm and 0.6 µm absolute ratings.
Faster flow rate: The larger filter surface area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe. Higher operating pressure: Millex filters have a maximum housing pressure of 10.5 bar (150 psig), which means you can filter solutions faster than before.
