Cap-Pure Capsule Filter Specification Filter Media PES Sealing System Thermal bonding Maximum Pressure 0.42Mpa Sterilization Autoclaved at 121 (132F ) for 20 minutes or Gamma Radiation Filtration Area 36mm capsule: 440c 75 mm capsule: 930c
Syringe Filters Feature: Polypropylene Housing. Better solvent stability compared to acrylate and polystrene filters. Shells ultrasonically sealed, not glued. No extractable components from glues. Filtration in both directions possible. The liquid cannot bypass the membranes. Luer-lok on side of entry.
Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of
Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand
compatibility with the liquid you want to filter by performing a trial filtration run before you start your actual filtration. Legend Compatible ++ Limited compatibility + Not compatible - not analyized n.a. 1) gamma irradiation feasible for Minisart ® Air For Minisart
Acrodisc® syringe filters at Pall shop are designed to meet diverse industrial, lab clarification, and sterilization needs. Explore our online store to learn more about the wide range of sizes, types, and membranes we offer.
Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of
membrane filter to prevent rapid plugging or use a 2-in-1 filter that has a built-in pre-filter in a single housing. 3. Choose the membrane type based on the solvent that you want to filter. Filter Types All filter inlets are female Luer-compatible, have inertdiameters.
I have filtered some samples of lake water through PES filters (pore size 0.22 um, filter diameter 73 mm). From these filters I will need to extract DNA for metagenomic analysis.
Filter Cartridges, Filter Membranes, Syringe Filter manufacturer / supplier in China, offering Nylon/Pes/PVDF/PTFE Pleated Filter Cartridges Compatible with Millipore′ S Water System, Membrane Filter Buffer 0.2um 0.45 Micron Pes Filter Cartridge for Blood Serum
13 mm Puradisc Syringe Filters (sterile) Membrane* Without tube tip With tube tip Nylon PVDF PES PVDF Quantity/pack Pore size (µm) 0.1 6786-1301 — — — 50 0.2 6786-1302 6791-1302 6780-1302 6778-1302 50 0.45 — 6791-1304 6780-1304 — 50
Hydrophilic PES Membrane for Sterile Filtration Descriptions Hydrophilic PES membrane consists of pure polyether sulfone polymers without support. It can provide good mechanical strength, thermal stability and broad chemical compatibility. It’s applicable for
MS ® SteriBio syringe filters are available with Polyethersulphone (PES) and Cellulose Acetate (CA) membranes. Each filter is individually packed and sterilized by Gama Radiation. Every box is printed with a Batch Number and Expry Date for quick and
1. Syringe Filter Information 1 Membrane Selection 2 Using Syringe Filters 3 2. Membrane Compatibility 4 Compatibility Chart 4 Membrane Characteristics 6 3. Syringe Filter Types 6 Nylon (NY) 7 Polytetrafluorethylene (PTFE). 8 9 Cellulose Acetate
11/7/2013 · From type of filtration to material, use these guidelines to select syringe filters, lab filters, and membranes and papers. Ultrafiltration is best with particles of roughly 10,000 to 1,000,000 MW. Microfiltration is best with particle
