This 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents
A versatile PVDF membrane filter designed for critical filtration of aqueous and organic solvent-based solutions. The hydrophilic SteriLUX ® polyvinylidene fluoride (PVDF) membrane filter is available in discs, capsules, high capacity UltraCap ® and UltraCap ® H.D. capsules, and cartridges with 0.1 µm, 0.2 µm, 0.4 µm and 0.6 µm absolute ratings.
C7631Durapore® membranes made with Polyvinylidene fluoride (PVDF) provide high flow rates and throughput, low extractables and broad chemical compatibility. Operating temperature: 85 °C max. 1 Corresponds to first 4 digits of catalogue number.
Features. Ideal for busy, high-volume labs. Available in a wide range of sizes, formats, and membranes to cover every matrix and sample type. All Captiva premium syringe filters are shipped with an HPLC or LC/MS certificate that guarantees low levels of observed extractables. Excellent flow rates and maximum sample loading capacities.
Supplier: Foxx Life Sciences High particulate, hydrophilic PVDF syringe filters have a 1.0 µm glass fiber prefilter designed for high throughputs and flow rates, and they have very low extractables. Hydrophilic Resistant to many solvents Low protein binding Great for HPLC sample prep
An absolute-rated PVDF filter for pharmaceutical gases as well as fermentor air and sterile vent filtration – also ideal for filtering many low surface tension chemicals and solvents. The hydrophobic Steridyne ® polyvinylidene fluoride (PVDF) membrane filter is 0.2 µm absolute-rated for the sterile filtration of air and gases.
Hydrophilic PVDF syringe filters are commonly used in general filtration applications , including water and organic filtration, aggressive solvent and biological solution disinfection filtration, which are characterized by high strength and porosity, high flow rate, and low extraction.
A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophobic PVDF membrane. Super hydrophobic membrane for Transducer protection Clear PVC housing material Ethylene oxide sterilized Comes in a pack of 50
Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0μm pore sizes. Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex™ sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas.
Pall’s sterile syringe filters are available with a variety of high-performance membranes to suit application requirements: Fluorodyne® II Membrane - For high flow rates and low protein binding. Not recommended for use with some ethers. Supor® Membrane - For high throughputs, fast filtration, and low protein binding.
flow PVDF PTFE Nylon Certified Syringe Filters High flow rate : ... the sales of Lab equipment and supplies. Syringe filter is designed to provide efficient ...
Whatman ® Spartan ® syringe filters provide reproducible filtration of organic and aqueous solutions for high performance and ultra-high performance liquid chromatography (HCLP and UHPLC) sample preparation. For batch-to-batch consistency, these filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 210
Maroon PVDF Syringe Filters, 0.22 µm, 17 mm PerkinElmer mm filters are suitable for coarse/crude samples or higher detection limit applications (such as food, beverage, or environmental analysis). These options provide improved filtration speeds and efficiencies due to an advanced pre-filter system and their larger diameters.
Millipore® membranes have supported laboratory filtration in academic, pharmaceutical, and industrial sectors since the 1950s. We provide a range of membrane chemistries including MF-Millipore® mixed cellulose esters, Durapore® PVDF, Millipore Express® PLUS polyethersulfone, as well as hydrophilic and hydrophobic PTFE.
Price/Filter. $1.40. Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.
