EZFlow® PES Syringe Filters. Foxx Life Sciences carries a fine collection of PES Syringe Filters available in 13mm, 25mm, and 33mm sizes. These are designed especially for aqueous and organic solution samples as well as the clarification and particle removal activities before instrumental analysis.
Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120
Available with many different membrane and housing options, Millex ® syringe filters are compatible with a variety of solvents and sample types. Designed for sterile and nonsterile small-volume filtration (1-200 mL) Produced with high-quality Millipore ® membranes Available in 4, 13, 25, 33, and 50 mm diameters
PES = Polyethersulfone CA = Cellulose Acetate RC = Regenerated Cellulose PP = Polypropylene GMF = Glass MicroFiber Use the information in this table to determine the ability of a specific syringe filter membrane to withstand exposure to a solvent. All concentrations are 100% unless noted. Syringe Filter Membrane Compatibility Chart
Dec 7, 2020 · CHROMAFIL® Syringe Filters - Polyethersulfone (PES) Hydrophilic membrane For aqueous and slightly organic liquids with higher flow rates Very low adsorption for pharmaceuticals and proteins Good stability against acids and bases Sterile PES (each filter individually sealed) Binding capacity for proteins for both types 29 µg/filter .tg {border-collapse:collapse;border-spacing:0;margin:0px
Syringe Filter Housings 1) Syringe filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. 2) Solutions at temperatures up to 100°C can be filtered using syringe filters.
Syringe Filters for Organic Solvents Compatibility between your syringe filter’s media and the organic solvents you are filtering is of utmost importance when performing any type of application. Not all syringe filter membrane materials are recommended for all substances and chemical reagents.
membrane filter to prevent rapid plugging or use a 2-in-1 filter that has a built-in pre-filter in a single housing. 3. Choose the membrane type based on the solvent that you want to filter. Filter Types All filter inlets are female Luer-compatible, have inert polypropylene or polycarbonate housings and come in four diameters. 30 mm filters
biological fluids. Refer to Table 3 for more chemical compatibility information. Polypropylene (PP) is used in the Spin-X® centrifuge filters and some of the syringe and disc filter housings. This plastic polymer has very good resistance to many solvents, refer to Table 3 for more chemical compatibility information.
Choice PES Syringe Filters Specifications. Membrane: HPLC certified; Maximum operating temperature: 100 °C; Housing: Medical grade, virgin polypropylene; Autoclave: Sterilize by dry heat at 121 °C for 15 minutes; Choice PES Syringe Filter Applications. IC sample preparation and analysis; Dissolution testing; Chemical Incompatibilities
PES Syringe Filters Pall provides three types of non-sterile Acrodisc® Syringe Filters featuring the Supor® hydrophilic polyethersulfone (PES) membrane. Acrodisc® syringe filters with Supor® membrane, modified acrylic housing Acrodisc syringe filters with Supor membrane, polypropylene housing Ion Chromatography (IC) Acrodisc® syringe filters
Nylon syringe filters can be used for both aqueous and solvent-based sample filtration applications and show excellent chemical compatibility with esters, bases and alcohols. However it should be noted that nylon syringe filters are not recommended for sample fluids which are strongly acidic. Pall supply nylon syringe filters in different.
Syringe Filters Solvent Compatibility Chart Syringe Filters Solvent Compatibility Chart Download PDF Top 9 Reasons to Use Restek Syringe Filters Protect any analytical system. Extend LC column lifetime. Achieve more reproducible analyses. Variety of membranes, porosities, and diameters available.
Acrodisc® Syringe Filters with GHP Membrane - Pall Corporation. Acrodisc PSF syringe filters are Zymark* and SOTAX* Automation Certified to ensure smooth operation and worry-free performance 24 hours a day in automated workstations. Avoid the expense and inconvenience of keeping a variety of filters on hand.
View Nylon Syringe Filters Polypropylene (PP) Polypropylene membranes are a hydrophobic membrane that exhibit a wide range of chemical compatibility to organic solvents. PP membranes are a good choice for filtration of HPLC samples when performing protein analysis by chromatography.
