•Set flow rate to 0.1 mL/min (for 2.1-4.6 mm ID) and install the column making sure that the arrow is in the direction of flow. Then increase the flow rate to 0.2 mL/min (2.1mm ID) or 1.0 mL/min (4.6 mm ID) for 5-10 minutes. Collect solvent in a small beaker. Stop flow and wipe outlet end of column to remove any particulates before
Quality filtration products from Phenomenex offer a convenien t and inexpensive way to clarify all your samples - for peace of mind and improved analytical results. Phenex syringe filters are designed for efficient and cost-effective rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high-
Pall BRAND Rephile Bogen Dreure Agela & Phenomenex. Pallflex® Air Monitoring Filters. Versatile Filters Uniquely Suited for a Broad Range of Air Monitoring Applications Pall Acrodisc® Syringe Filters with Supor® Membrane. Syringe Filters with High Flow Rates and Low Protein Binding, Superior flow rates and higher throughputs than ...
column (Phenomenex, Aschaffenburg, Germany) was employed for separation. Mobile phase A consited of 50 mM KH 2PO 4, 5 % ethanol (pH 3.0). Mobile phase B consisted of 50 mM KH 2PO 4, 200 mM NaCl and 20 % ethanol (pH 3.0). The injection volume was 10 µL (fungi) or 5 µL (opium). Separation was performed at a flow rate of 1.5 mL/min (35 ºC
BACkPreSSure AnD FLow rATeS To maximize column life, flow rates should be adjusted to keep pressures below 3500 psi. Table 4 Particle Internal Typical Flow Typical Pressure(psi) Size µm Diameter(mm) Rate(mL/min) 150 mm* 250 mm* 3 | 4.6 | 0.5 | 985 | 1640 5 1.0 0.1 1500 2500 5 2.0 0.2 750 1250
Versatile Filters Uniquely Suited for a Broad Range of Air Monitoring Applications Pall Acrodisc® Syringe Filters with Supor® Membrane Syringe Filters with High Flow Rates and Low Protein Binding, Superior flow rates and higher throughputs than competitive devices., Pall Acrodisc Syringe Filters with Supor Membrane, Sterile Filtration...
Phenex™ syringe filters are designed for efficient and cost-effective rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high throughput. Phenex offers a wide variety of membranes ideal for any application. The housing attaches to any standard Luer lock syringe, so the sample can easily be
Oct 12, 2017 · One microliter concentrated extract was injected and separated on a ZB-Wax column (30 m × 0.25 mm i.d., 0.50 μm film thickness, Phenomenex, Torrance, CA, U.S.A.). Helium was used as carrier gas at a constant flow rate of 2.5 mL/min. The GC injector and ODP temperature were both set at 250 °C.
A Luna phenomenex, C18 100A (150 × 4.60 mm, 5 μm), HPLC column was used. A linear gradient at a flow rate of 0.5 ml/min was used and the total analytical time was approximately 35 min. The binary mobile phase consisted of solvent A (ultrapure water with 0.1% phosphoric acid) and solvent B (pure methanol with 0.1% phosphoric acid).
Tisch Scientific offers an extensive selection of proven, yet affordable syringe filters that are in stock and ready to ship today. Selected for their durability, material quality and performance characteristics, our syringe filters deliver accurate, measurable results at a fraction of the cost.
An integrated syringe filter unit containing an inert borosilicate glass fiber prefilter and a PVDF membrane. The hydrophilic PVDF membrane provides high flow rates and throughput, low extractables and broad chemical compatibility. This membrane binds less protein than nylon or PTFE AF6-6D06-12 100/pk AF6-6D06-52 500/pk Phenex-GF/CA 2,3,4
Sterile Syringe Filters Sterile syringe filters from Phenomenex are ready-to-use, individually blister packaged units, offering high flow rates at low inlet pressures, for rapid sterile filtration. All-Plastic Disposable Syringes • Use for all syringe filter applications* • Luer-lock outlet makes connection easy
Phenex syringe filters are designed for efficient and cost-effective rapid fil-tration of almost any solution prior to analysis, and are optimized for superior flow rates and high-thoughput. Phenex offers a wide variety of membranes ideal for any ap-plication. The housing attaches to any standard Luer lock syringe, so the
Phenex syringe filters are designed for efficient and cost-effective rapid fil-tration of almost any solution prior to analysis, and are optimized for superior flow rates and high-thoughput. Phenex offers a wide variety of membranes ideal for any ap-plication. The housing attaches to any standard Luer lock syringe, so the
Phenomenex recommends the use of KrudKatcher™ Ultra in-line filter to extend the lifetime of your Kinetex™ column, especially with samples extracted from complex matrixes. Ideally, samples must be completely dissolved in the mobile phase or filtered through a syringe filter of approximately 0.20 μm porosity. Part No. Description Unit
