Whatman quartz fiber filter paper includes grades QM-A, QM-B and QM-H. High-purity quartz (SiO2) microfiber filters are used for air sampling in acidic gases, stacks, flues, and aerosols, particularly at high temperatures up to 800°C and in PM2.5/PM10 and trace element analysis.
Syringe Filter, Minisart High Flow, PES, 28 mm, 0.45µm, gamma-sterile, 50 pc/PAK Regular Price: €135.00 Special Price €130.95
Puradisc™ 25 Syringe Filters. Cytiva. Quick and efficient sample filtration HPLC sample preparation Sterile isolation Autoclavable at 121°C Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for maximum sample recovery.
EconoClear syringe filters use PES, Polyethersulfone, with its very wide chemical compatibility and excellent flow rates. These syringe filters have proved themselves in applications such as sample clarification prior to HPLC, IC or ICP analysis. They come mainly in 0.45 pore sizes, 28mm diameter, and in packs of 100 and 500.
Chemical compatibility is a critical consideration when selecting the best sample prep syringe filter or mobile phase disc filter for your application. Pall provide a range of analytical filter membranes, this includes our wwPTFE membrane which is compatible with the majority of common solvent and sample types.
We offer access to filtration devices for infusion therapy and drug delivery that are non-shedding with low protein binding, high flow rates, absolute pore size ratings, biocompatibility and low extractable. Our membranes have been used for decades by leading medical device and pharmaceutical manufacturers to ensure the safe and effective administration of intrave- nous drug preparations.
Syringe Pump KL605T Specifications Model KL-605T Syringe Sizes 5,10, 20, 30, 50/60 ml Applicable Syringe Compatible with syringe of any standard VTBI 1-1000 ml in 0.1 , 1 , 10 ml increments Flow Rate Syringe 5ml : 0.1-100 ml/h
Oct 17, 2017 · A 10 μL of 400 mg/mL sample volume was repeatedly injected for isolation. The mobile phase consisted of aqueous phosphoric acid (0.3% v/v; pH 1.76; solvent A) and aqueous acetonitrile (10% v/v; Solvent B) at a flow rate of 9 mL/min. A linear gradient was applied from 0 to 70% solvent B in 20 min.
Labfil Syringe Filters. Labfil syringe filters use PES (Polyethersulphone) with very wide chemical compatibility and excellent flow rates. These syringe filters have proved themselves in applications such as sample clarification prior to HPLC, IC or ICP analysis. They come mainly in 0.45 μm pore size, 30 mm diameter ,and in packs of 50 and 500.
OSHA Instruction TED 01-00-015. The OSHA Technical Manual (OTM) provides technical information about workplace hazards and controls to OSHA’s Compliance Safety and Health Officers (CSHOs). This information supports OSHA’s enforcement and outreach activities to assure safe and healthful working conditions for working men and women.
0.2 micron rated validated sterilizing-grade membrane filters. Utilizing a laid-over-pleat membrane geometry for high flow rates and throughput performance, they are designed for the most cost effective filtration of a wide range of liquids such as buffers, tissue culture media, and others.
These products boast high quality construction, with low hold-up volumes. Labotec Syringe Filters are available in FS or WS options. The FS range is available in materials including Nylon, Hydrophobic and Hydrophilic PTFE, PES, PVDF, MCE, CA, GF, PP and Active Carbon. Sterile options can be arranged!
from the 0.2 µm Acrodisc MS syringe filters and 0.45 µm Acrodisc PSF syringe filters with nylon membrane). Injections were stopped when the pressure reached approximately 4,000 psi. Test Results and Discussion Injection of the unfiltered and the 0.45 µm filtered suspensions resulted in a rapid and significant increase in the
High quality and cost effective, our stock of nylon syringe filters are designed for sterilization or clarification of aqueous & solvent samples in a wide array of analytical and research applications. Spectrum specializes in providing the top lab syringe filters but if you do not see the product you require, just contact our chemical
