This spawn jar lid will fit all regular mouth (70 mm) canning jars. It is intended to be used atop jars of live spawn or mycelium. The lid is equipped with a super heavy duty injection port and a 0.3 µm synthetic filter disc (29 mm diameter) that allows for contaminant-free gas exchange. The lid and all components are 100% autoclavable.
Our synthetic filter discs provide for contaminant-free gas exchange on spawn jar lids. All of our synthetic filter discs have a pore size of 0.3 microns. We carry multiple sizes of filter discs: 29mm (for custom-made spawn jar lids), 70mm (regular mouth jars), 90mm (widemouth jars), 110mm, and 125mm.
6Pcs Wide Mouth Mushroom Liquid Culture Lid,Split-type Grain Spawn Cultivation Mason Jar Lid with 0.22um PTFE Syringe Filter & 20mm Self Healing Injection Ports For Mushroom Growing Mycology (Silver) 32. $1898 $19.99. Save 5% with coupon. FREE delivery Tue, Jan 24 on $25 of items shipped by Amazon.
Jun 17, 2012 · for each jar, remove the jar lid ring and set it aside. flame sterilize the syringe needle, and then wipe the needle with alcohol to remove the flame residue. slide the synthetic filter disc to one side, exposing 1 of the 1/4" holes in the jar lid. inoculate the grain jar through this 1 hole, slide the synthetic filter disc back into place, and
This liquid culture (LC) lid will fit all regular mouth (70 mm) canning jars. The lid is equipped with a super heavy duty injection port and a 0.22 µm syringe filter (13 mm diameter) that provides the contaminant-free gas exchange your liquid culture needs. The lid and all components are 100% autoclavable.
Shroom Supply Syringe Filter - 0.22 μm - PTFE Sizes: 13 mm & 25 mm - Available in both 13mm and 25mm diameters. These autoclavable 0.22 µm micron syringe filters are made out of a hydrophobic PTFE and are 100% reusable. They are perfect for inserting into liquid culture jar lids to provide contaminant-free gas exchange.
Nov 11, 2020 · 6Pcs Regular Mouth Mushroom Liquid Culture Lid Grain Spawn Cultivation Mason Jar Lid with 0.2 Micron PTFE Syringe Filter & 20mm Self Healing Injection Ports for Mushroom Growing Mycology (Silver) Brand: Biomed Solutions 396 ratings $2199 Get Fast, Free Shipping with Amazon Prime FREE Returns Color: 70mm Regular mouth (Silver) About this item
I’ve noticed people using syringe filters for LC jar lids, and filter disks/poly fill/micro pore tape for grain spawn lids. Is a syringe filter
Feb 7, 2023 · Most importantly, you need to clean the injection port itself with alcohol wipes. Do this thoroughly; if it hosts fungal spores or bacteria, you might just push these straight through when you inject. Second, you need to sterilise the needle of your syringe. Do this by holding it in a flame until it is red-hot.
Feb 25, 2021 · The second generation Lid comes with two self healing injection for injecting culture to inoculate the substrate more average and a PTFE syringe filter for avoid contamination without glue,more healthy for mushroom growing. These lids can be used in a microwave, autoclave or pressure cooker. Our professional grade autoclavable wide mouth jar lids are built to be lab-quality, and made specifically for liquid culturing . Leave the lids a quarter turn loose while in the pressure cooker so air
High-Quality Scientific Syringe Filter for Mushroom Spawn Jar Lids. These syringe filters provide an ideal amount of fresh air exchange while at the same time preventing airborne particles from contaminating your spawn. Color may vary. Usage Instructions: Simply drill a 5/32 hole in a canning lid and insert the syringe filter with the narrow
Syringe filter (13 mm diameter, 0.22 µm). Installed into a canning jar lid, the filter will keep contaminants out, while allowing for adequate gas exchange your liquid cultures. Syringe filter may be a different colour than shown in picture. Drill a 5/32″ hole in a canning lid and insert the syringe filter with the narrow end snugly into the hole.
This liquid culture (LC) lid will fit all widemouth (86 mm) canning jars. The lid is equipped with a super heavy duty injection port and a 0.22 µm syringe filter (25 mm diameter) that provides the contaminant-free gas exchange your liquid culture needs. The lid and all components are 100% autoclavable. The heavy duty injection port is of the highest quality and is able to withstand hundreds of repeated injections before needing to be replaced.
Syringe filters for spawn jar lids So I thought I would make all my jar lids with syringe filters, instead of patches, due to only having to maintain one style of lid and also the longevity of the filters. I did a g2g transfer to two jars with syringe filters and felt like the growth wasn’t colonizing fast enough.
High-Quality Scientific Syringe Filter for Mushroom Spawn Jar Lids. These syringe filters provide an ideal amount of fresh air exchange while at the same time preventing airborne particles from contaminating your spawn. Color may vary. Usage Instructions: Simply drill a 5/32 hole in a canning lid and insert the syringe filter with the narrow end snugly into the hole.
