Polytetrafluoroethylene PTFE Syringe Filters, 0.45um, 4mm, Luer-Lok/Luer Slip, Sterile, 100 per pack $125.99 TSH-SF18244 Polytetrafluoroethylene PTFE Syringe Filters, 3um, 33mm, Luer-Lok/Luer Slip, Sterile, 100 per pack $279.99 TSH-SF18248 PTFE Syringe Filters, 0.10 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack $1,022.75 TSH-SF18085
High-Quality Scientific Syringe Filter for Mushroom Spawn Jar Lids. These syringe filters provide an ideal amount of fresh air exchange while at the same time preventing airborne particles from contaminating your spawn. Color may vary. Simply drill a 5/32 hole in a canning lid and insert the syringe filter with the narrow end snugly into the hole.
Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Target 2 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 17 mm, 100 Pk.
Introduction. MS ® PTFE syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. PTFE Syringe Filter.
Suitable for sample preparation for high performance and ultra-high performance liquid chromatography (HPLC and uHPLC). Choice of 13 mm or 25 mm syringe filter diameter to suit sample volume. Choice of 0.2 μm or 0.45 μm pore sizes for retaining a variety of particles. Suitable for rapid syringe filtration of samples up to 100 mL.
PTFE Syringe Filters, 5 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF17400 Regular Price$149.74Price$130.21As low as$117.19 Add to Cart Add to Wish List Tisch Scientific PTFE Syringe Filter, 0.45 µm, 25 mm, Luer-Lok/Luer Slip, Non-Sterile, 100 Pack, SF14469
Filter the mixture through a 0.45 μm PTFE or Nylon syringe filter into an HPLC vial. Secure the vial with a septum and cap. Results and Discussion Six levels of calibration standards, ranging from 0.5 to 80 mg/L, and three Quality Control (QC) standards at 2.5 mg/L, 25 mg/L and 60 mg/L were prepared.
Mar 29, 2017 · Feature: syringe filter diameter: 13mm, pore size: 0.22um, membrane material: PTFE , hydrophobic property . Syringe filters are made of inert plastic house, membrane, and luer lock fit. It is used with disposal syringes or filtration device with luer fit. Syringe filters are often one-time use only.
Black Pearl King Oyster Mushroom Liquid Culture Syringe $13.99 Black Poplar Mushroom Liquid Culture Syringe $13.99 Blue Oyster Mushroom Liquid Culture Syringe $13.99 Branched Oyster Mushroom Liquid Culture Syringe $13.99 Brick Cap Mushroom Liquid Culture Syringe $13.99 Brown Beech Mushroom Liquid Culture Syringe $13.99
13mm diameter syringe filter: Filter Ø: 13 mm Filtration area: 1.09 mm 2 Housing material: polypropylene Holdup volume: <20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on membrane) Inlet: Luer lock female
For filtering aqueous solutions, we offer hydrophilic PTFE membrane filters from Advantec. With these filters, there is no need to pre-wet the membrane or flush pre-wetting chemicals. The hydrophilic PTFE membranes are able to maintain filtration integrity, reduce interference with biological processes, and maximize shelflife.
high flow rate PTFE syringe filter Millex-PTFE Membrane Filter Millex Syringe Filters - SOMATCOFaster Flow Rate 33 mm Millex filters have 20% more filter surface than 25 mm filters for significantly higher flow rate and throughput.
Apr 22, 2020 · Black VIP. 735 posts. Posted 22 April 2020 - 08:18 PM. These are the ones I use. No issues as of yet. Syringe Filter PTFE Membrane 25mm Diameter 0.22um Pore Size Biomed Scientific Non Sterile Pack of 100 https://www.amazon.ci_6YoOEb7K961FQ. DonShadow and Misfit like this.
We carry PTFE syringe filters for making liquid culture lids in both 13mm and 25mm diameters. We also offer the largest selection of synthetic filter discs online. Our synthetic filter discs provide for contaminant-free gas exchange on spawn jar lids. All of our synthetic filter discs have a pore size of 0.3 microns.
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
