Hydrophilic discs made of noncharged, unreinforced Nylon 66 in 0.2 and 0.45μm pore sizes. Won't contaminate a sample with extractables. Autoclaved or sterilized by EtO. Thermal compatibility: ≤135°C (275°F) Absorbance: <0.002 absorbance units or 2mV, after 2 min. of column volume. Applications:
Nylon filters are compatible with a broad range of solvents. Two types are available: 1) Nylon Membrane Filters with pore sizes ranging from 0.20 to 1.2 µm, and 2) Woven Net Filters with mesh openings ranging from 5 to 180 µm. Our 5 µm Nylon Woven Net Filter (NY054700) is commonly used in the automotive industry for cleanliness analysis.
Non Sterile Millex Stringe Filter with Hydrophilic Nylon Membrane are compatible with a broad range of solvents, making them ideal for sample filtration of most aqueous and organic solvents across the laboratory. Syringe filters are available in two pore sizes and three diameters to optimize results.
Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters. Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives. Their unsurpassed quality and consistency of results has led
Millipore is founded in 1954.The Millipore headquarter is located in Massachusetts, USA.Millipore is part of the S&P 500 index , employs approximately 5,800 employees in more than 47 offices worldwide and services for more than 100 countries.
Millipore nylon membrane filters are compatible with a broad range of solvents. Nylon membrane filters are ideal for use with sterilization filtration, bioassays and solvent fitlration. They are also commonly used for clarification of aqueous solutions, particle removal and analysis. Filter Diameter: 47mm. Pore Size: 0.45µm; Filter Color: White. Filter Surface: Plain. Filter Type: Screen filter.
SFNY030045N. National Scientific F2500-1. Titan 44526-NN. $174.34. 30%. Add to Cart. Nylon syringe filters offer universal application for analytical procedures. Hydrophilic Nylon is ideal for aqueous (non-acidic) or organic sample prep and HPLC, GC or dissolution sample analysis.
Introduction. MS ® PVDF syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. PVDF (Polyvinylidene fluoride) – extremely low protein-binding
Millex ® hydrophilic PTFE syringe filters boast low analyte retention, with ≥90% recovery of small molecules – matching or exceeding the performance of other equivalent filters. Figure 2. Comparison of small molecule retention of 0.45 μm hydrophilic PTFE syringe filters from different vendors. Figure 3.
9. Hydrophilic PTFE Syringe Filter Single Layered Non-Sterile/0. 2µm/ 13mm. ICTF13RB. SLLGH13NL. 10. Hydrophilic PTFE Syringe Filter Single Layered Non-Sterile/0. 45µm/ 13mm. ICTF13XB.
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS ITEM WILL BE REPLACED BY SLCR033NB Replaced by SLCR033NB, 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.
•Nylon filters provide broad chemical compatibility for use with aqueous and organic solutions. •Millipore Express® PLUS (PES) filters have fastest flow rates and higher throughput. •MF-Millipore™ mixed cellulose ester (MCE) membrane is a widely used, general purpose filter. Millex Syringe Filters Filter with confidence
25mm Nylon Welded Syringe Filter 0.22um with Printing. C0000281. 13mm PTFE Hydrophilic Welded Syringe Filter 0.22um with Printing. C0000283. 25mm PTFE Hydrophilic Welded Syringe Filter 0.22um with Printing. C0000289. 13mm PVDF Hydrophilic Welded Syringe Filter 0.22um with Printing. C0000291. 25mm PVDF Hydrophilic Welded Syringe Filter 0.22um
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
Devices Millex® syringe filters, Millex Samplicity® filters, filter discs Nylon Membrane Membrane Material Nylon Pore Sizes (µm) 0.2 - 1.2 Thickness (µm) 150 - 190 Water Flow Rate (mL/min/cm2)@ 27.5 in. Hg 8.0 - 21.2 (typical value) Wettability Hydrophilic Chemical Compatibility Compatible with both aqueous and organic solvents
