china 9mm 9-425 chromatography vials for sale
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm Capacity: 150-250uL Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1 pack
CP-0952-03-RS - 300ul clear fused insert Vial/ScrwCap
With RSA Glass vials and inserts this will not occur if the adsorption is due to silanol interaction. If you are working with sensitive compounds commonly found in natural products, biological samples or chemical synthesis, the glass wall could be a problem for
AccQ•Tag Ultra Derivatization Kit (Hamilton) - Waters Corporation
Stock Standard Preparation 1. Add 1.2 mL of 0.1 M HCl to 17 Amino Acid Hydrolysates Standard (blue vial ) to give a concentration of 1000 µM for each amino acid except cystine which has a concentration of 500 µM. Vortex for 10 seconds. This standard is 2.
WATERS 717PLUS OPERATOR'S MANUAL Pdf
3. Place the assembled sample vials in the carousel and note the location. The vial number is located on the rim of the carousel. Attention: Use of non-Waters sample vials, low-volume inserts, and septa may STOP result in damage to the Page 82: Ensuring
100 Vials for HPLC, UPLC, GC ideas in 2021 | vials, gas
Micro-insert can be equipped with 8-425 screw autosampler vial, 9mm HPLC vial, ND11 crimp and snap sample vial #microinsert #microvial #HPLC #autosamplervial #LC #GC. 9mm screw autosampler vial with micro-insert for chromatography analysis. This micro-insert is mainly for expensive sample analysis #micro-insert #autosamplervial #HPLC.
Buy Glass Vials - PremiumVials
250uL Micro-Insert, conical bottom, 31x6mm for 9mm vials, 100/pk 250uL Micro-Insert, Flat Bottom, Clear, 31x5mm for 8-425 vials, 500/pk TSH-CV2049 $63.99
Micro Inserts | analytics-shop.com
ND9 0,1ml Micro-Insert for Short Thread Vials with wide opening, 31x6mm, 15mm top, 10x100/pac. Regular Price: €224.40. Special Price. €157.08. SKU: AAV17201468. In Stock. Waters.
2ml Snap Vial made of Borosilicate Glass--Aijiren Vials for
There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.
Chromacol Vials and Inserts
0.6mL PP CRIMP/SNAP VIAL W CYLINDRICAL INSERT. 500. 06-PPSVW. 0.6mL PP 9mm SCREW TOP VIAL W CYLINDRICAL INSERT. 500. 07-CPV. VIAL 0.7mL 8mm CRIMP CLEARTAPERED BTM 7X40MM, 500. 07-CPV (A)
Chromatography Vial Inserts | VWR
Description: Glass inserts are designed for standard- or wide-opening 12x32mm vials. ,66008-190PK,66016-188PK,66008-030PK,66008-108CS,66008-032PK,66008-112PK,66106-182PK. This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above.
Wheaton Shell Vials
8 x 40 mm. Can be used in Waters WISP™ 96-position autosampler. Choice of borosilicate glass or polypropylene. 0.15 or 0.20 mL limited volume insert. Snap plug closures available in 5 colors. Purchase vials and caps separately or together in convenience packs.
10-425 wide screw vial-Aijiren Vials for HPLC/GC
Vials are manufactured in clear type 1 class A or amber type 1 class B borosicate glass. 10-425 screw fasteners and 10mm septum must be used. 2ml Amber Glass Vials on Sale Aijiren 10mm wide opening screw vial 2mL, 12x32mm 10mm wide opening screw vial and insert. 10-425 thread finish.
Inserts & Shell Vials - Quzhou Lab Technology Co.,Ltd
Inserts with an outside diameter of 5mm are used with vials with standard mouth openings and the 6mm are used with wide mouth vials. The length of the insert should be flush with the neck of the vial to prevent the. insert from causing the septum to bulge.
Viales | VWR
Descripción: The 1 mL, 8 x 35 mm vials are designed for use in Alcott model 728 autosamplers. The 1 mL, 8 x 40 mm vials are specifically designed for Waters® 96-po
The importance of vial composition in HPLC analysis: An
2017/2/5 · Three of vial C were filled with only 100 μl of a stock solution of phosphoramidite in acetonitrile and another three with 2 ml, after 6 h the solutions were transferred to an inert insert. The data illustrates that the higher surface area to volume ratio of the 100 μl samples resulted in 3 x higher levels of epimerization during the same time as the 2 ml samples.