Sartorius. Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis. Related Products: Regenerated Cellulose Syringe Filter. Compare this item.
Minisart ® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. Type 16534 with a pore size of 0.2 µm can be used for sterile filtration and has a male luer lock outlet.
Filters Minisart® Syringe 0.2um 25mm N/S PTFE pk 500 -. Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of - 4. Type 7575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Ve.
Minisart-Plus Filters - An integral glass fiber prefilter greatly reduces the clogging associated with typical disposable syringe filtration units. Cellulose acetate filters, 26mm in diameter, with 0.2 μm, or 0.45 μm pores. The Minisart-Plus have a hold-up volume of 0.1mL. Sterile; individually packaged.
Minisart® syringe filters are available in a broad range of pore sizes. They are ideal for clarification of liquids laden with particles, e.g. for preparation of phar-maceuticals or infusion solutions. For sterilization and removal of particles from air and other gases, syringe filters are optimal for sterile venting of containers,
The Minisart® High Flow is a syringe filter for rapid volume sterilisation with maximum user convenience. Ready-to-use units, which offer flow rates at low inlet pressures, allow for a correspondingly rapid sterile filtration. Product Specification: Filter diam.: 28mm. Pore size: 0.45 µm.
unit than Minisart ® RC, e.g. for solvents such as acetone, dimethylformamide and DMSO, or for aggressive aqueous liquids. Minisart ® SRP syringe filters ensure rapid small volume sterilisation with maximum user convinience. They offer high flow rates at low inlet pressures.
Please refer to Minisart ® RC, NY or SRP for the highest chemical compatibility, page 8. Please refer to Minisart ® NML or Minisart High Flow on page 12. Several additional Minisart ® for venting and special purposes could be found on page 16. Minisart® Syringe Filters A full range of filters dedicated for various filtration applications.
Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.
Minisart NML standard syringe filter for clarification and sterilization of liquids and gases. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the
Acrodisc® and 1.4 filters for Minisart® High Flow. Figure 5: CHO cell culture supernatants were filtered through two different syringe filter types (0.22 µm): Sartorius Minisart® High Flow and Pall Acrodisc ®. The average throughput per syringe filter was determined. Differences in throughput between both filter types were probably not
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Manufacturer: Sartorius 17576Q
Minisart ® Syringe Filters: The Easy Choice – Clean and Safe For sterilization of liquids, sterile filtration with Minisart ® syringe filters is the optimal solution. They remove all microorganisms and particles reliably, without any influence of their ingredients, due to adsorption or decomposition.
Sterile filtration, clarification, and particle removal. Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes.
Manufacturer: Sartorius Corporation. For sterile filtration and particle removal and ultracleaning. Ready-to-use syringe filters with PES membrane have excellent flow speed and high filterable volume. Offer flow rates at low inlet pressures, allow for a correspondingly rapid sterile filtration. Specifications. HPIS Code. 530_40_60_0. Latex Free.
