These Corning® syringe filters have polypropylene copolymer housings, female Luer lock inlets and male Luer slip outlets. Regenerated cellulose (RC) membranes are the best choice for DMSO compatibility. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
Millex-HV Syringe Filter Unit, 0.45 µm. A 13 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100. A 4 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100.
1.PVDF Syringe Filter: Part No. FF1322 : FF1345: FF2522: FF2545: Description: Pore Size: 0.22um Diameter:13mm PVDF Syringe Filter Polypropylene Housing: Pore Size: 0.45um
Above syringe filters are non-sterile. Housing is made of medical-grade polypropylene (PP), and offer luer lock inlet/ slip outlet connections, unless otherwise indicated. If Phenex Syringe Filters do not perform as well or better than your current syringe filter product of similar membrane, diameter and pore size,
HPLC Syringe Filter, Nylon/Hydrophilic PVDF Syringe Filter 2. PTFE Syringe Filter Part No. FE1322 FE1345 FE2522 FF2545 Description Pore Size: 0.22um Diameter:13mm PTFE Syringe Filter Polypropylene Housing Pore Size: 0.45um Diameter:13mm PTFE Syringe Filter Polypropylene Housing Pore Size: 0
polypropylene housing ptfe 0.45 micron filter for minerals VWR® Syringe Filters | VWR Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis.
Captiva Syringe Filters Part Number: 5190-5263. Captiva Econofilter, polypropylene housing, polyvinylidenedifluoride (PVDF) membrane, 25 mm diameter, 0.2 µm pore
Phenex syringe filters are designed for efficient and rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high throughput. Proper membrane and size selection are the keys to choosing the best product to maintain the integrity of your sample components as well as to protect your system from
Filter Media PTFE, Nylon, PVDF, wwPTFE Housing Polypropylene Pore Size 0.2 and 0.45 µm Effective Filtration Area 13 mm: 1.0 cm2 25 mm: 2.8 cm2 Sample Volume 13 mm: <10 mL 25 mm: <100 mL Typical Hold-Up Volume 13 mm: <30 μL 25 mm: <100 µL Maximum Operating Temperature 55 ºC Ordering Information Part Number Description Pkg
Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PVDF (Hydrophobic PVH) Syringe Filter 0.45 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophobic PVH) Syringe Filter 0.2 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophobic PVH) Syringe Filter 0.2 µm, 13 mm, 100 Pk.
Syringe Filter Pore Size (µm) 5 0.72 0.45 3 0.43 0.20 2.6 0.38 0.20 1.7 0.25 0.20 Column Flow Path Eliminate Damaging Contaminants Before They Reach Your Expensive HPLC/UHPLC Column with Syringe Filters Phenomenex l WEB: www.phenomenex.com Phenomenex l WEB: www.phenomenex.com
Syringe Filter, PVDF, 0.45µm, 30mm Diameter Denville polypropylene which is chemically resistant to a wide range of solutes and solvents. Denville Scientific Syringe Filters are constructed so that the sample must pass through the membrane, not leak around it. Denville Syringe Filters are easy to use.
Syringe filter unit specification Titan3 Target2 4 mm 17 mm 30 mm 4 mm 17 mm 30 mm Housing Polypropylene with integral colour-coded sealing ring Polypropylene with integral colour-coded sealing ring Polypropylene with integral colour-coded sealing ring Polypropylene Polypropylene Polypropylene Filtration area 0.125 cm2 1.6 cm2 4.9 cm2 0.125 cm2
