Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) 13 mm: < 28 µL 25 mm: < 70 µL 32 and 37 mm: < 100 µL Maximum Operating Temperature 55 °C (131 °F) Maximum Operating Pressure 5.2 bar (520 kPa, 75 psi) Typical Water Flow Rate mL/min at 3.1 bar (310 kPa, 45 psi) 0.1 μm, 25 mm: 35 0.1 μm, 32 mm: 100 0.2
Filters are Triton-free and have a bidirectional membrane support and luer lock (15/25 mm dia) or stepped barbs (50 mm dia) inlet/outlet for a secure fit to the syringe. Membrane type and pore size are printed on each filter for easy identification.
Toggle menu. (888) 545-3117; Sign in or Register; Wish Lists; Compare ; Gift Certificates Certificates
GE Bio-Sciences 10463505 ReZist Syringe Filter, PTFE/Polypropylene, Female Luer Lock/Male Luer, 0.2 µm Pore Size, 30 mm Diameter, White (Pack of 500) FREE delivery Tisch Brand SPEC16279 Polytetrafluoroethylene PTFE Syringe Filter, 3um, 25mm, Double luer Lock, 1/pk/100 per Pack | Wettability: Hydrophobic | Maximum Operating Temperature: 60 Degrees C |
Our most popular syringe. 12 cc syringe with a luer lock tip. Autoclavable. All syringes are sterile and individually packaged. This is the most common size of syringe used in the mycology hobby and are the size most spore vendors use to package and ship spore or culture syringes. 12 cc syringes are the size to go with if you are unsure about what size syringe you will need for standard
Syringe Filters with Luer Lock Inlet Luer lock inlet offers leak-tight syringe connection. Variety of filter types, porosities, and diameters. Labeled (13, 25, and 30 mm, only) and color coded for easy identification. Rugged polypropylene housing. Autoclavable to 121 °C for 15 minutes. Quantity break pricing for greater savings.
Sterile filtration, clarification, and particle removal Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2 0.1µm to 5µm pore sizes
Syringe Filter, PTFE, 0.22µm, 13mm Diameter Denville luer-lock syringe and are color-coded for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL. The 13mm filters can filter 5 to 10mL of sample and have a retention volume of only 28µL.
Mar 29, 2017 · Syringe filters are made of inert plastic house, membrane, and luer lock fit. It is used with disposal syringes or filtration device with luer fit. Syringe filters are often one-time use only. Biomed Scientific syringe filters offer universal application for analytical procedures. Hydrophobic PTFE suitable for Organic solvent with strong chemical causticity filtration;Strong acid solvent filtration; Alkali solvent filtration.
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Non-Sterile, Female Luer Lock, Male Luer Slip, Pack Size 500 Added to Shopping Cart Minisart ® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.
Filter Type: D25 mm: Quantity per Pack: 100: Pore Size: 0.22 µm: Sterilization: Sterile: Inlet / Outlet: Female Luer Lock / Male Luer Lock: Housing Material: Polypropylene: Wettability: Hydrophobic: Burst Pressure (psi) 87: Filtration Area (cm2) ≥4.9 cm2: Maximum Operating Temperature: 60 Degrees C / 140 Degrees F: Maximum Operating Pressure (@23 Degrees C) 5.2bar / 75psi
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
Manufactured only from laboratory grade polypropylene and polyethylene. These unique plastic syringes have a positive safety stop to prevent accidental spills. NORM-JECT® syringes are individually sterile strip packed. FDA registered, CE Mark, ISO9001 certified. Related Products: Norm-ject® Sterile Luer-lock Syringe.
MILLEX® Sterile Syringe Filters Hydrophilic PTFE Membranes MilliporeSigma A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Related Products: Hydrophilic Ptfe Compare this item Hydrophobic PTFE Membrane Filters
Biolanbo male luer lock syringe filters adopt polycarbonate as housing material and female luer lock inlet, male luer lock outlet and available in the specification of 33mm. Features: Disposable,γ sterilization,ready-to-use, filtration efficiency (0.22μm): LRV＞7 Brevundimonas diminuta, ATCC19146, ASTM bacterial challenge test
