Micro-inserts, ND8 for small opening | VWR
Instantly transform vials from full to limited volume with chromatography vial inserts for maximum content retrieval. Manufactured in either borosilicate glass or polypropylene for sensitive samples, these instruments require less sample amounts. Designs offered include flat, conical, or mandrel point bottoms and may come with or without a plastic spring. Screw-top vials also come in different
Fisherbrand™ Polypropylene 0.1mL Micro-Insert for wide
Standard opening vials require 5mm inserts, Wide opening vials 6mm Inserts Shop Fisherbrand™ Polypropylene 0.1mL Micro-Insert for wide opening vial at Fishersci.co.uk
1.0ml MICRO INSERTS, CONICAL BASE – Bio-medical Laboratory
1.0 ml Product Code: C/422 Categories: Insert Cups , Polypropylene Insert Cups , Sample Cups, Insert/Nest Cups & Cuvettes GTIN: 5.06044E+12 Insert/Nest Cups & Cuvettes
0.1ml Conical Bottom Micro Insert Suit for 8-425 Vial-Aijiren
MicroLiter limited volume inserts are made from Type 1 borosilicate glass or polypropylene and meet strict tolerances. Conical inserts, inserts with plastic springs, and flat bottom inserts are available to assist in consistent sampling of low-volume samples.
UK clear glass micro insert manufacturer-HPLC Vial Inserts
Short Thread Vial ND9, with Micro Insert, clear glass. Short Thread Vial ND9, clear glass, 32 x 11,6 mm, with integrated micro-insert 0,2 ml, "base bonded", 100 pieces in PP Box. 0.1ml Micro-Insert, 29 x 5mm, clear glass, with attached plastic spring. 0.1ml Micro-Insert, 29 x 5mm, clear glass, with attached plastic spring. Part No. INSC-01SP.
Inserts for 1.5 mL large opening vials volume 0.1 mL, conical
Vial inserts for 1.5 mL large opening vials [volume 0.1 mL, clear glass conical (with bottom spring)] allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Large opening vials (6.0 mm ID) require a 6 mm OD insert.
Genetec - 0.1 ml conical PP Micro Insert - Inserts - Vials
0.1ml PP Micro-Insert, 29 x 6mm, clear, 10mm top, with filling lines and attached Plastic Spring . PartNo: 06192241 Qty/pkg: 100
0.1 mL Vial Inserts, Glass, Conical Base with Polyspring, 100
0.1mL Vial Inserts Glass Clear Insert Tube for 8-425 Vials; Material: USP Type 1, 68 Borosilicate Expansion, 1st Hydrolytic, Clear Glass; Dimensions: 29 x 5 mm; Fill vol: 0.2ml ,Usable vol:0.1ml; Content: 100 pcs/pk
0.1ml Polypropylene Micro Insert Suit for 11mm Snap Vial
Micro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts (volume 0.15 mL, glass insert (with bottom spring), O.D. x H 6 mm x 38 mm) allow the use of smaller sample volumes with standard autosampler vials.
6mm Vial Micro Insert Conical Base With Polyspring - Aijiren
Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro Inserts decrease the surface area inside chromatography vials, enabling maximum sample recovery. Our micro-insert products are available in conical bottom, flat bottom, conical bottom with polyspring. Product Code & Description:
Chrominex 0.1ml conical PP micro insert for vials
Chrominex 0.1ml conical PP micro insert for vials Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack
UK 0.1ml conical PP micro insert for lab use-HPLC Vial Inserts
8, 05090129, LPP 0.1ml Conical Glass Insert, 31 x 5mm, 26, 06192240, La-Pha-Pack 0.1ml PP Micro-Insert, 29 x 6mm, clear [06192240] / La-Pha-Pack. Vials Catalogue v10.indd - Labicom.cz. Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Polypropylene snap caps with PTFE/silicone with slit, 1.0mm thick.
0.1ml Micro-Insert, 31 x 6mm, clear glass, 15mm top
Insert, Wide Opening Vial, 0.1ml (31 x 6mm), Conical ALERT! Click here to be redirected to your correct website +44 (0)1480 212 122. Contact Us. Don't have an account
0.1ml conical PP micro insert online-HPLC Vial Inserts
Standard opening vials require 5mm inserts, Wide opening vials 6mm Inserts Shop Fisherbrand™ Polypropylene 0.1mL Micro-Insert for wide opening vial at Aijiren - Polygen. conical. 100 pieces per PP-Box. 100 pieces per PP-Box. LPP. Packaging Unit per PP-Box. 1 : 1. Drawings. 06 09 1240. 0.1ml. Micro-Insert,. 31 x 6mm,.
0.1ml conical PP micro insert for wholesales-HPLC Vial Inserts
8, 05090129, LPP 0.1ml Conical Glass Insert, 31 x 5mm, 26, 06192240, La-Pha-Pack 0.1ml PP Micro-Insert, 29 x 6mm, clear [06192240] / La-Pha-Pack. Karin Sauer Editor - c-di-GMP Signaling 0.1 mL of cleared lysate to a microfuge tube and store at the internal standard (400 ng/mL) directly in the micro insert of the injection vial.